Tag: Energy

Best Research Paper of Wind Energy Generation Systems PDF
Wind Energy Generation Systems PDF – 5 Best Research Paper, Wind power generation is power generation that converts wind energy into electric energy, power generation systems in PDF. Also, The wind creating set ingests wind energy with an uncommonly planned sharp edge and converts wind energy to mechanical energy, which further drives the generator to pivot and understands the transformation of wind energy to electric energy.

Here is the article to explain, 5 top Authors’ researchers and their Best Research Paper on Wind Energy Generation Systems PDF.

The generally utilized wind power or energy generation systems incorporate the direct-determined wind power producing set and the twofold taken care of wind power creating set; the direct-determined wind power creating set associate with the matrix through a full force converter; while the twofold taken care of wind power producing set associate with the framework through a twofold taken care of converter.

Wind power generation, which can change over the motor energy of wind into electric energy without genuine ecological harm, views as perhaps the most encouraging disseminated energy assets on the planet. Generally, modest establishment cost speeds up the establishment of wind power generation on the planet.

There are numerous puts on the earth where the wind consistently presents. As the wind is normally accessible mechanical energy, we can utilize this wind to turn generators to deliver power. Essentially producing power by turning generators with the assistance of wind knows as wind energy power generation or basically wind power generation or wind power generation.

Wind Energy Electricity Generation System:

The wind is a perfect wellspring of energy. It has no impact on the nursery in the climate. It subs for non-renewable energy sources like coal, petrol and flammable gas, and so forth even though coal, petrol, and flammable gas, and so on are the essential wellspring of fuel for delivering power, the accessibility of such petroleum product restrict.

Around the world, 67% of power creates from petroleum products, 13% from thermal power, and the remainder of 20% from sustainable power sources, for example, hydro energy, sunlight based energy, wind energy, flowing energy, and so forth So we perceive how much the world relies upon petroleum derivative for creating power and that is the reason we center around wind and other sustainable power sources to produce power to defeat the reliance on petroleum products.

The running expense of creating power with wind energy is very low. When the turbines introduce, and there is no much upkeep need for quite a while. The wind energy power generation framework takes some land for the establishment, however, we can utilize the vast majority of the land for development. So land is definitely not a major issue for wind turbine creating systems. As a rule, wind plants introduce decent tallness to acquire adequate wind to create power.

More thing of power systems;

It is currently the quickest developing power asset on the planet. One single wind turbine will most likely be unable to create the ideal degree of power. Thus, the number of wind turbines associates with getting the ideal yield. Also, This gathering of wind turbines together knows as a wind ranch. We should pick the spot for building a wind ranch where the wind speed is adequate to move the edge of the turbine. At the point when the wind blows through the sharp edges of a turbine, the turbine turns to run a generator to create power.

Also, This power streams down through the link connected to the turbine tower. This link additionally interconnects with links from other wind turbines in the wind ranch. Consequently, power from all wind turbines goes to a typical hub from where it takes for additional closures. All things considered, this power utilizes straightforwardly for homegrown or mechanical burden or attract by any framework to satisfy the prerequisite of power.

Qualities, Features, and Characteristics of Annual Distribution of Wind Power Generation:

Wind power generation in Jiuquan Wind Power Base has the accompanying qualities, features, characteristics:
- This territory has rich wind assets all year. As per the information gathered in Qiaowan, Ganhekou, Changma, and Beidaqiao wind estimation poles in Jiuquan; the everyday normal wind speed all year is over 3 m/s. Also, The number of days with the day-by-day normal wind speed at 3 m/s or more records for 51% of the entire year; the number of days with the day-by-day normal wind speed at 13 m/s or more records for 5% of the entire year.
- Wind speed is profoundly occasional. The normal wind speed between March and May in Jiuquan is very high; while the normal wind speed between October and the next February is very low.
- Also, Wind speed varies pointedly. In Qiaowan, Ganhekou, Changma, and Beidaqiao consistently, and most days in a year the wind speed will vary between moving toward nothing and evaluated wind speed.
5 Best Research Paper of Wind Energy Generation Systems PDF by Author;

The following 5 best creator gives their best research paper of the Wind Energy Generation Systems in PDF below are;

Hybrid Power Generation System Using Wind Energy and Solar Energy by Ashish S. Ingole, Prof. Bhushan S. Rakhonde:

Now a day’s electricity is the most needed facility for human beings. All the conventional energy resources are depleting day by day. So we have to shift from conventional to non-conventional energy resources. In this, the combination of two energy resources is taking place i.e. wind and solar energy. Also, This process reviles sustainable energy resources without damaging nature. We can give uninterrupted power by using a hybrid energy system.

Basically, this system involves the integration of two energy systems that will give continuous power. Solar panels are used for converting solar energy and wind turbines use for converting wind energy into electricity. Also, This electrical power can utilize for various purposes. The generation of electricity will take place at an affordable cost. This paper deals with the generation of electricity by using two sources combine; which leads to generating electricity with affordable cost without damaging the natural balance…more read 4 pages in PDF.

Wind Energy Systems; This paper reviews application of power electronics in wind energy systems. By Frede Blaabjerg, Fellow IEEE, and Ke MA, Member IEEE.

Wind power now represents a major and growing source of renewable energy. Large wind turbines (with capacities of up to 6Ð8 MW) widely install in power distribution networks. Increasing numbers of onshore and offshore wind farms; acting as power plants, connect directly to power transmission networks at the scale of hundreds of megawatts. As its level of the grid, penetration has begun to increase dramatically; wind power is starting to have a significant impact on the operation of the modern grid system. Advanced power electronics technologies are being introduced to improve the characteristics of wind turbines; and, make them more suitable for integration into the power grid.

Meanwhile, some emerging challenges still need to be addressed. This paper provides an overview and discusses some trends in the power electronics technologies used for wind power generation. First, the state-of-the-art technology and global market generally discuss. Several important wind turbine concepts discuss; along with power electronics solutions either for individual wind turbines or for entire wind farms. Some technology challenges and future solutions for power electronics in wind turbine systems are also addressed…more read 16 pages in PDF.

Wind Power Generation Technology, by Mrs. N.V. Vader and Mrs. V.A. Joshi:

The paper deals with the technical details involved in the generation of power through wind technology. Also, It discusses the factors responsible for the generation of wind power and the limitations of the generator. While the emphasis is given on the various schemes used for the production of electricity using wind power; the paper also gives insight into energy storage methods, safety precautions, and site selection criteria…more read 10 pages in PDF.

Wind Energy Technology: Current Status and R&D Future, by Robert Thresher, Michael Robinson, and Paul Veers:

Wind energy is one of the fastest-growing electrical energy sources in the United States. The United States installed over 5,200 MW in 2007; and, experts are forecasting for as much to be installed in 2008. The United States cumulative installed capacity as of Dec. 31, 2007, was 16, 596 MW. Wind turbines have evolved rapidly over the past 20 years; and, the turbines have grown in size from 100 kW in the early 1980s to over 2.5 MW today.

The evolution of wind technology is expected to continue over the next two decades resulting in a continued improvement in reliability and energy capture with a modest decrease in cost. Also, The development of new and innovative rotors, drive systems, towers, and controls is expected to enable this continued improvement in the cost-effectiveness of wind technology. Wind energy can supply 20% of the United States’ electricity needs by 2030; and, will be a significant contributor to the world’s electricity supply…more read 32 pages in PDF.

Wind Energy: A Review Paper, by Atul Kumar and Muhammad Zafar Ullah Khan:

This review paper examined the outline of wind innovation, where the approach depends on standards and down-to-earth executions. Wind vitality is the second biggest wellspring of sustainable power sources after hydropower. It is incredibly reasonable, yet it is discontinuous. Even though the abuse of twist goes back a few centuries; the cutting-edge wind vitality industry started amid the oil emergency of the seventies. Most these days wind turbines are onshore; however others are fabricated seaward, more often than not in wind ranches. Since wind vitality is discontinuous, it must be upheld by different wellsprings of power. Wind vitality can be productive as a rule. However, it has not yet accomplished full matrix equality with fossil vitality sources…more read 8 pages in PDF.

5 Best Research Paper of Wind Energy Generation Systems PDF; Image from Pixabay.
April 24, 2021
Cellular Respiration

What is Cellular Respiration?

Some organisms, such as plants, can trap the energy in sunlight through photosynthesis (see Photosynthesis) and store it in the chemical bonds of carbohydrate molecules. The principal carbohydrate formed through photosynthesis is glucose. Other types of organisms, such as animals, fungi, many protozoa, and a large portion of bacteria, are unable to perform this process. Therefore, these organisms must rely on the carbohydrates formed in plants to obtain the energy necessary for their metabolic processes.

Animals and other organisms obtain the energy available in carbohydrates through the process of cellular respiration. Cells take the carbohydrates into their cytoplasm, and through a complex series of metabolic processes, they break down the carbohydrates and release the energy. The energy is generally not needed immediately; rather, it is used to combine adenosine diphosphate (ADP) with phosphate ions to form adenosine triphosphate (ATP) molecules. The ATP can then be used for processes in the cells that require energy, much as a battery powers a mechanical device.

During the process of cellular respiration, carbon dioxide is given off. This carbon dioxide can be used by plant cells during photosynthesis to form new carbohydrates. Also in the process of cellular respiration, oxygen gas is required to serve as an acceptor of electrons. This oxygen is identical to the oxygen gas given off during photosynthesis. Thus, there is an interrelationship between the processes of photosynthesis and cellular respiration, namely the entrapment of energy available in sunlight and the provision of the energy for cellular processes in the form of ATP.

The overall mechanism of cellular respiration involves four processes: glycolysis, in which glucose molecules are broken down to form pyruvic acid molecules; the Krebs cycle, in which pyruvic acid is further broken down and the energy in its molecule is used to form high-energy compounds, such as nicotinamide adenine dinucleotide (NADH); the electron transport system, in which electrons are transported along a series of coenzymes and cytochromes and the energy in the electrons is released; and chemiosmosis, in which the energy given off by electrons pumps protons across a membrane and provides the energy for ATP synthesis. The general chemical equation for cellular respiration is:

C6H12O6 + 6 O2 → 6 H2O + 6CO2 + energy

Figure 1. provides an overview of cellular respiration. Glucose is converted to pyruvic acid in the cytoplasm, which is then used to produce acetyl CoA in the mitochondrion. Finally, the Krebs cycle proceeds in the mitochondrion. Electron transport and chemiosmosis result in energy release; ATP synthesis also occurs in the mitochondrion.

Glycolysis

Glycolysis is the process in which one glucose molecule is broken down to form two molecules of pyruvic acid (also called pyruvate). The glycolysis process is a multi-step metabolic pathway that occurs in the cytoplasm of animal cells, plant cells, and the cells of microorganisms. At least six enzymes operate in the metabolic pathway.

In the first and third steps of the pathway, ATP energizes the molecules. Thus, two ATP molecules must be expended in the process. Further along in the process, the six-carbon glucose molecule converts into intermediary compounds and is then split into two three-carbon compounds. The latter undergo additional conversions and eventually form pyruvic acid at the conclusion of the process.

During the latter stages of glycolysis, four ATP molecules are synthesized using the energy given off during the chemical reactions. Thus, four ATP molecules are synthesized and two ATP molecules are used during glycolysis, for a net gain of two ATP molecules.

Figure 1. An overview of cellular respiration.

Another reaction during glycolysis yields enough energy to convert NAD to NADH (plus a hydrogen ion). The reduced coenzyme (NADH) will later be used in the electron transport system, and its energy will be released. During glycolysis, two NADH molecules are produced.

Because glycolysis does not require oxygen, the process is considered to be anaerobic. For certain anaerobic organisms, such as some bacteria and fermentation yeasts, glycolysis is the sole source of energy.

Glycolysis is a somewhat inefficient process because much of the cellular energy remains in the two molecules of pyruvic acid that are created. Interestingly, this process is somewhat similar to a reversal of photosynthesis (see Photosynthesis).

Krebs Cycle

Following glycolysis, the mechanism of cellular respiration involves another multi-step process—the Krebs cycle, which is also called the citric acid cycle or the tricarboxylic acid cycle. The Krebs cycle uses the two molecules of pyruvic acid formed in glycolysis and yields high-energy molecules of NADH and Flavin adenine dinucleotide (FADH2), as well as some ATP.

Krebs Cycle

The Krebs cycle occurs in the mitochondrion of a cell (see Figure 6). This sausage-shaped organelle possesses inner and outer membranes and, therefore, inner and outer compartments. The inner membrane is folded over itself many times; the folds are called cristae. They are somewhat similar to the thylakoid membranes in chloroplasts (see Photosynthesis). Located along the cristae are the important enzymes necessary for the proton pump and for ATP production.

Prior to entering the Krebs cycle, the pyruvic acid molecules are altered. Each three-carbon pyruvic acid molecule undergoes conversion to a substance called acetyl-coenzyme A, or Acetyl-CoA. During the process, the pyruvic acid molecule is broken down by an enzyme, one carbon atom is released in the form of carbon dioxide, and the remaining two carbon atoms are combined with a coenzyme called coenzyme A. This combination forms Acetyl-CoA. In the process, electrons and a hydrogen ion are transferred to NAD to form high-energy NADH.

Acetyl-CoA enters the Krebs cycle by combining with a four-carbon acid called oxaloacetic acid. The combination forms the six-carbon acid called citric acid. Citric acid undergoes a series of enzyme-catalyzed conversions. The conversions, which involve up to ten chemical reactions, are all brought about by enzymes. In many of the steps, high-energy electrons are released to NAD. The NAD molecule also acquires a hydrogen ion and becomes NADH. In one of the steps, FAD serves as the electron acceptor, and it acquires two hydrogen ions to become FADH2. Also, in one of the reactions, enough energy is released to synthesize a molecule of ATP. Because for each glucose molecule there are two pyruvic acid molecules entering the system, two ATP molecules are formed.

Also during the Krebs cycle, the two carbon atoms of Acetyl-CoA are released, and each forms a carbon dioxide molecule. Thus, for each Acetyl-CoA entering the cycle, two carbon dioxide molecules are formed. Two Acetyl-CoA molecules enter the cycle, and each has two carbon atoms, so four carbon dioxide molecules will form. Add these four molecules to the two carbon dioxide molecules formed in the conversion of pyruvic acid to Acetyl-CoA, and it adds up to six carbon dioxide molecules. These six CO2 molecules are given off as waste gas in the Krebs cycle. They represent the six carbons of glucose that originally entered the process of glycolysis.

At the end of the Krebs cycle, the final product is oxaloacetic acid. This is identical to the oxaloacetic acid that begins the cycle. Now the molecule is ready to accept another Acetyl-CoA molecule to begin another turn of the cycle. All told, the Krebs cycle forms (per two molecules of pyruvic acid) two ATP molecules, ten NADH molecules, and two FADH2 molecules. The NADH and the FADH2 will be used in the electron transport system.

Electron Transport System

The electron transport system occurs in the cristae of the mitochondria, where a series of cytochromes (enzymes) and coenzymes exist. These cytochromes and coenzymes act as carrier molecules and transfer molecules. They accept high-energy electrons and pass the electrons to the next molecule in the system. At key proton-pumping sites, the energy of the electrons transports protons across the membrane into the outer compartment of the mitochondrion.

Each NADH molecule is highly energetic, which accounts for the transfer of six protons into the outer compartment of the mitochondrion. Each FADH2 molecule accounts for the transfer of four protons. The flow of electrons is similar to that taking place in photosynthesis. Electrons pass from NAD to FAD, to other cytochromes and coenzymes, and eventually they lose much of their energy. In cellular respiration, the final electron acceptor is an oxygen atom. In their energy-depleted condition, the electrons unite with an oxygen atom. The electron-oxygen combination then reacts with two hydrogen ions (protons) to form a water molecule (H2O).

The role of oxygen in cellular respiration is substantial. As a final electron acceptor, it is responsible for removing electrons from the electron transport system. If oxygen were not available, electrons could not be passed among the coenzymes, the energy in electrons could not be released, the proton pump could not be established, and ATP could not be produced. In humans, breathing is the essential process that brings oxygen into the body for delivery to the cells to participate in cellular respiration.

Chemiosmosis

The actual production of ATP in cellular respiration takes place through the process of chemiosmosis (see Cells and Energy). Chemiosmosis involves the pumping of protons through special channels in the membranes of mitochondria from the inner to the outer compartment. The pumping establishes a proton (H+) gradient. After the gradient is established, protons diffuse down the gradient through a transport protein called ATP synthase. The flow of hydrogens catalyzes the pairing of a phosphate with ADP, forming ATP.

The energy production of cellular respiration is substantial. Most biochemists agree that 36 molecules of ATP can be produced for each glucose molecule during cellular respiration as a result of the Krebs cycle reactions, the electron transport system, and chemiosmosis. Also, two ATP molecules are produced through glycolysis, so the net yield is 38 molecules of ATP. These ATP molecules may then be used in the cell for its needs. However, the ATP molecules cannot be stored for long periods of time, so cellular respiration must constantly continue in order to regenerate the ATP molecules as they are used. Each ATP molecule is capable of releasing 7.3 kilocalories of energy per mole.

Fermentation

Fermentation is an anaerobic process in which energy can be released from glucose even though oxygen is not available. Fermentation occurs in yeast cells, and a form of fermentation takes place in bacteria and in the muscle cells of animals.

In yeast cells (the yeast used for baking bread and producing alcoholic beverages), glucose can be metabolized through cellular respiration as in other cells. When oxygen is lacking, however, glucose is still metabolized to pyruvic acid via glycolysis. The pyruvic acid is converted first to acetaldehyde and then to ethyl alcohol. The net gain of ATP to the yeast cell is two molecules—the two molecules of ATP normally produced in glycolysis.

Yeasts are able to participate in fermentation because they have the necessary enzyme to convert pyruvic acid to ethyl alcohol. This process is essential because it removes electrons and hydrogen ions from NADH during glycolysis. The effect is to free the NAD so it can participate in future reactions of glycolysis. The net gain to the yeast cell of two ATP molecules permits it to remain alive for some time. However, when the percentage of ethyl alcohol reaches approximately 15 percent, the alcohol kills the yeast cells.

Yeast is used in both bread and alcohol production. Alcohol fermentation is the process that yields beer, wine, and other spirits. The carbon dioxide given off during fermentation supplements the carbon dioxide given off during the Krebs cycle and causes bread to rise.

In muscle cells, another form of fermentation takes place. When muscle cells contract too frequently (as in strenuous exercise), they rapidly use up their oxygen supply. As a result, the electron transport system and Krebs cycle slow considerably, and ATP production is slowed. However, muscle cells have the ability to produce a small amount of ATP through glycolysis in the absence of oxygen. The muscle cells convert glucose to pyruvic acid. An enzyme in the muscle cells then converts the pyruvic acid to lactic acid. As in the yeast, this reaction frees up the NAD while providing the cells with two ATP molecules from glycolysis. Eventually, however, the lactic acid buildup causes intense fatigue, and the muscle stops contracting.

March 20, 2017
Photosynthesis

What is Photosynthesis?

A great variety of living things on Earth, including all green plants, synthesize their foods from simple molecules, such as carbon dioxide and water. For this process, the organisms require energy, and that energy is derived from sunlight.

Figure 1. shows the energy relationships in living cells. Light energy is captured in the chloroplast of plant cells and used to synthesize glucose molecules, shown as C6H12O6. In the process, oxygen (O2) is released as a waste product. The glucose and oxygen are then used in the mitochondrion of the plant cell, and the energy is released and used to fuel the synthesis of ATP from ADP and P. In the reaction, CO2 and water are released in the mitochondrion to be reused in photosynthesis in the chloroplast.

Energy relationships in living cells Cycles

Figure 1. Energy relationships in living cells.

The process of utilizing energy to synthesize carbohydrate molecules is called photosynthesis. Photosynthesis is actually two separate processes. in the first process, energy-rich electrons flow through a series of coenzymes and other molecules. This electron energy is trapped. During the trapping process, adenosine triphosphate (ATP) molecules and molecules of nicotinamide adenine dinucleotide phosphate hydrogen (NADPH) are formed. Both ATP and NADPH are rich in energy. These molecules are used in the second process, where carbon dioxide molecules are bound into carbohydrates too form organic substances such as glucose.

Chloroplast

The organelle in which photosynthesis occurs (in the leaves and green stems of plants, for example) is called the chloroplast. Chloroplasts are relatively large organelles, containing a watery, protein-rich fluid called stroma. The stroma contains many small structures composed of membranes that resemble stacks of coins. Each stack is a granum (the plural form is grana). Each membrane in the stack is a thylakoid. Within the thylakoid membranes of the granum, many of the reactions of photosynthesis take place. The thylakoids are somewhat similar to the cristae of mitochondria (see Cellular Respiration).

Photosystems

Pigment molecules organized into photosystems capture sunlight in the chloroplast. Photosystems are clusters of light-absorbing pigments with some associated molecules—proton (hydrogen ion) pumps, enzymes, coenzymes, and cytochromes (see Cells and Energy). Each photosystem contains about 200 molecules of a green pigment called chlorophyll and about 50 molecules of another family of pigments called carotenoids. In the reaction center of the photosystem, the energy of sunlight is converted to chemical energy. The center is sometimes called a light-harvesting antenna.

There are two photosystems within the thylakoid membranes, designated photosystem I and photosystem II. The reaction centers of these photosystems are P700 and P680, respectively. The energy captured in these reaction centers drives chemiosmosis, and the energy of chemiosmosis stimulates ATP production in the chloroplasts.

Process of Photosynthesis

The process of photosynthesis is conveniently divided into two parts: the energy-fixing reaction (also called the light reaction) and the carbon-fixing reaction (also called the light-independent reaction or the dark reaction).

Energy-fixing reaction

The energy-fixing reaction of photosynthesis begins when light is absorbed in photosystem II in the thylakoid membranes. The energy of the sunlight, captured in the P680 reaction center, causes the electrons from P680’s chlorophyll to move to a higher, unstable energy level. These electrons pass through a series of cytochromes in the nearby electron-transport system.

After passing through the electron transport system, the energy-rich electrons eventually enter Photosystem-I. Some of the energy of the electron is used to pump protons across the thylakoid membrane, and this pumping sets up the potential for chemiosmosis.

The spent electrons from P680 enter the P700 reaction center in photosystem I. Sunlight activates the electrons, which receive a second boost out of the chlorophyll molecules. There they reach a high energy level. The electrons progress through a second electron transport system, but this time there is no proton pumping. Rather, the energy reduces NADP. This reduction occurs as two electrons join NADP and energize the molecule. Because NADP acquires two negatively charged electrons, it attracts two positively charged protons to balance the charges. Consequently, the NADP molecule is reduced to NADPH, a molecule that contains much energy.

Because electrons have flowed out of the P680 reaction center, the chlorophyll molecules are left without a certain number of electrons. Electrons secured from water molecules replace these electrons. Each split water molecule releases two electrons that enter the chlorophyll molecules to replace those lost. The split water molecules also release two protons that enter the cytoplasm near the thylakoid and are available to increase the chemiosmotic gradient.

The third product of the split water molecules is oxygen. Two oxygen atoms combine with one another to form molecular oxygen (O2), which is given off as the by-product of photosynthesis; it fills the atmosphere and is used by all oxygen-requiring organisms, including plant and animal cells.

Described above are the noncyclic energy-fixing reactions (see Figure 2). Certain plants and autotrophic prokaryotes are also known to participate in cyclic energy-fixing reactions. These reactions involve only photosystem I and the P700 reaction center. Excited electrons leave the reaction center, pass through coenzymes of the electron transport system, and follow a special pathway back to P700. Each electron powers the proton pump and encourages the transport of a proton across the thylakoid membrane. This process enriches the proton gradient and eventually leads to the generation of ATP.

Figure 2. The energy-fixing reactions of photosynthesis.

ATP production in the energy-fixing reactions of photosynthesis occurs by the process of chemiosmosis (explained in Cells and Energy). Essentially, this process consists of a rush of protons across a membrane (the thylakoid membrane, in this case), accompanied by the synthesis of ATP molecules. Biochemists have calculated that the proton concentration on one side of the thylakoid is 10,000 times that of the opposite side of the membrane.

In photosynthesis, the protons pass back across the membranes through channels lying alongside sites where enzymes are located. As the protons pass through the channels, the energy of the protons is released to form high-energy ATP bonds. ATP is formed in the energy-fixing reactions along with the NADPH formed in the main reactions. Both ATP and NADPH provide the energy necessary for the synthesis of carbohydrates that occurs in the second major set of events in photosynthesis.

Carbon-fixing reaction

Glucose and other carbohydrates are synthesized in the carbon-fixing reaction of photosynthesis, often called the Calvin cycle after Melvin Calvin, who performed much of the biochemical research (see Figure 3). This phase of photosynthesis occurs in the stroma of the plant cell.

A carbon-fixing reaction or the Calvin cycle

Figure 3. A carbon-fixing reaction, also called the Calvin cycle.

In the carbon-fixing reaction, an essential material is carbon dioxide, which is obtained from the atmosphere. The carbon dioxide is attached to a five-carbon compound called ribulose bisphosphate. Ribulose bisphosphate carboxylase catalyzes this reaction.

After carbon dioxide has been joined to ribulose bisphosphate, a six-carbon product forms, which immediately breaks into two three-carbon molecules called phosphoglycerate. Each phosphoglycerate molecule converts to another organic compound, but only in the presence of ATP. The ATP used is the ATP synthesized in the energy-fixing reaction. The organic compound formed converts to still another organic compound using the energy present in NADPH. Again, the energy-fixing reaction provides the essential energy. Each of the organic compounds that results consists of three carbon atoms. Eventually, the compounds interact with one another and join to form a single molecule of six-carbon glucose. This process also generates additional molecules of ribulose bisphosphate to participate in further carbon-fixing reactions.

Glucose can be stored in plants in several ways. In some plants, the glucose molecules are joined to one another to form starch molecules. Potato plants, for example, store starch in tubers (underground stems). In some plants, glucose converts to fructose (fruit sugar), and the energy is stored in this form. In still other plants, fructose combines with glucose to form sucrose, commonly known as table sugar. The energy is stored in carbohydrates in this form. Plant cells obtain energy for their activities from these molecules. Animals use the same forms of glucose by consuming plants and delivering the molecules to their cells.

All living things on Earth depend in some way on photosynthesis. It is the main mechanism for bringing the energy of sunlight into living systems and making that energy available for the chemical reactions taking place in cells.

March 20, 2017
Cells and Energy

What are Cells and Energy?

The Laws of Thermodynamics; Life can exist only where molecules and cells remain organized. All cells need energys to maintain organization. Physicists define energy as the ability to do work; in this case, the work is the continuation of life itself.

Energy has been expressed in terms of reliable observations known as the laws of thermodynamics. There are two such laws. The first law of thermodynamics states that energy can neither be created nor destroyed. This law implies that the total amount of energy in a closed system (for example, the universe) remains constant. Energys neither enters nor leaves a closed system.

Within a closed system, energy can change, however. For instance, the chemical energy in gasoline is released when the fuel combines with oxygen and a spark ignites the mixture within a car’s engine. The gasoline’s chemical energy is changed into heat energy, sound energy, and the energy of motion.

The second law of thermodynamics states that the amount of available energy in a closed system is decreasing constantly. Energy becomes unavailable for use by living things because of entropy, which is the degree of disorder or randomness of a system. The entropy of any closed system is constantly increasing. In essence, any closed system tends toward disorganization.

Unfortunately, the transfers of energy in living systems are never completely efficient. Every body movement, every thought, and every chemical reaction in the cells involves a shift of energy and a measurable decrease of energy available to do work in the process. For this reason, considerably more energy must be taken into the system than is necessary to carry out the actions of life.

Chemical Reactions

Most chemical compounds do not combine with one another automatically, nor do chemical compounds break apart automatically. The great majority of the chemical reactions that occur within living things must be energized. This means that the atoms of a molecule must be separated by energy put into the system. The energy forces apart the atoms in the molecules and allows the reaction to take place.

To initiate a chemical reaction, a type of “spark,” referred to as the energy of activation, is needed. For example, hydrogen and oxygen can combine to form water at room temperature, but the reaction requires activation energy.

Any chemical reaction in which energy is released is called an exergonic reaction. In an exergonic chemical reaction, the products end up with less energy than the reactants. Other chemical reactions are endergonic reactions. In endergonic reactions, energy is obtained and trapped from the environment. The products of endergonic reactions have more energy than the reactants taking part in the chemical reaction. For example, plants carry out the process of photosynthesis, in which they trap energy from the sun to form carbohydrates (see Photosynthesis).

The activation energy needed to spark an exergonic or endergonic reaction can be heat energy or chemical energy. Reactions that require activation energy can also proceed in the presence of biological catalysts. Catalysts are substances that speed up chemical reactions but remain unchanged themselves. Catalysts work by lowering the required amount of activation energy for the chemical reaction. For example, hydrogen and oxygen combine with one another in the presence of platinum. In this case, platinum is the catalyst. In biological systems, the most common catalysts are protein molecules called enzymes. Enzymes are absolutely essential if chemical reactions are to occur in cells.

Enzymes

The chemical reactions in all cells of living things operate in the presence of biological catalysts called enzymes. Because a particular enzyme catalyzes only one reaction, there are thousands of different enzymes in a cell catalyzing thousands of different chemical reactions. The substance changed or acted on by an enzyme is its substrate. The products of a chemical reaction catalyzed by an enzyme are end products.

All enzymes are composed of proteins. (Proteins are chains of amino acids; see The Chemical Basis of Life.) When an enzyme functions, a key portion of the enzyme, called the active site, interacts with the substrate. The active site closely matches the molecular configuration of the substrate. After this interaction has taken place, a change in shape in the active site places a physical stress on the substrate. This physical stress aids the alteration of the substrate and produces the end products. During the time the active site is associated with the substrate, the combination is referred to as the enzyme-substrate complex. After the enzyme has performed its work, the product or products are released from the enzyme’s active site. The enzyme is then free to function in another chemical reaction.

Enzyme-catalyzed reactions occur extremely fast. They happen about a million times faster than uncatalyzed reactions. With some exceptions, the names of enzymes end in “–ase.” For example, the enzyme that breaks down hydrogen peroxide to water and hydrogen is catalase. Other enzymes include amylase, hydrolase, peptidase, and kinase.

The rate of an enzyme-catalyzed reaction depends on a number of factors, such as the concentration of the substrate, the acidity and temperature of the environment, and the presence of other chemicals. At higher temperatures, enzyme reactions occur more rapidly, but only up to a point. Because enzymes are proteins, excessive amounts of heat can change their structures, rendering them inactive. An enzyme altered by heat is said to be denatured.

Enzymes work together in metabolic pathways. A metabolic pathway is a sequence of chemical reactions occurring in a cell. A single enzyme-catalyzed reaction may be one of multiple reactions in a metabolic pathway. Metabolic pathways may be of two general types: catabolic and anabolic. Catabolic pathways involve the breakdown or digestion of large, complex molecules. The general term for this process is catabolism. Anabolic pathways involve the synthesis of large molecules, generally by joining smaller molecules together. The general term for this process is anabolism.

Many enzymes are assisted by chemical substances called cofactors. Cofactors may be ions or molecules associated with an enzyme and are required in order for a chemical reaction to take place. Ions that might operate as cofactors include those of iron, manganese, and zinc. Organic molecules acting as cofactors are referred to as coenzymes.

Adenosine Triphosphate (ATP)

The chemical substance that serves as the currency of energy in a cell is adenosine triphosphate (ATP). ATP is referred to as currency because it can be “spent” in order to make chemical reactions occur. The more energy required for a chemical reaction, the more ATP molecules must be spent.

Virtually all forms of life use ATP, a nearly universal molecule of energy transfer. The energy released during catabolic reactions is stored in ATP molecules. In addition, the energy trapped in anabolic reactions (such as photosynthesis) is trapped in ATP molecules.

An ATP molecule consists of three parts. One part is a double ring of carbon and nitrogen atoms called adenine. Attached to the adenine molecule is a small five-carbon carbohydrate called ribose. Attached to the ribose molecule are three phosphate units linked together by covalent bonds.

Adenosine Triphosphate Structure

The covalent bonds that unite the phosphate units in ATP are high-energy bonds. When an ATP molecule is broken down by an enzyme, the third (terminal) phosphate unit is released as a phosphate group, which is an ion. When this happens, approximately 7.3 kilocalories of energy are released. (A kilocalorie equals 1,000 calories.) This energy is made available to do the work of the cell.

The adenosine triphosphatase enzyme accomplishes the breakdown of an ATP molecule. The products of ATP breakdown are adenosine diphosphate (ADP) and a phosphate ion. Adenosine diphosphate and the phosphate ion can be reconstituted to form ATP, much like a battery can be recharged. To accomplish this, synthesis energy must be available. This energy can be made available in the cell through two extremely important processes: photosynthesis.

ATP Production

ATP is generated from ADP and phosphate ions by a complex set of processes occurring in the cell. These processes depend on the activities of a special group of coenzymes. Three important coenzymes are nicotinamide adenine dinucleotide (NAD), nicotinamide adenine dinucleotide phosphate (NADP), and Flavin adenine dinucleotide (FAD).

NAD and NADP are structurally similar to ATP. Both molecules have a nitrogen-containing ring called nicotinic acid, which is the chemically active part of the coenzymes. In FAD, the chemically active portion is the Flavin group. The vitamin riboflavin is used in the body to produce this Flavin group.

All coenzymes perform essentially the same work. During the chemical reactions of metabolism, coenzymes accept electrons and pass them on to other coenzymes or other molecules. The removal of electrons or protons from a coenzyme is oxidation. The addition of electrons to a molecule is reduction. Therefore, the chemical reactions performed by coenzymes are called oxidation-reduction reactions.

The oxidation-reduction reactions performed by the coenzymes and other molecules are essential to the energy metabolism of the cell. Other molecules participating in this energy reaction are called cytochromes. Together with the coenzymes, cytochromes accept and release electrons in a system called the electron transport system. The passage of energy-rich electrons among cytochromes and coenzymes drains the energy from the electrons to form ATP from ADP and phosphate ions.

The actual formation of ATP molecules requires a complex process called chemiosmosis. Chemiosmosis involves the creation of a steep proton (hydrogen ion) gradient. This gradient occurs between the membrane-bound compartments of the mitochondria of all cells and the chloroplasts of plant cells. A gradient is formed when large numbers of protons (hydrogen ions) are pumped into the membrane-bound compartments of the mitochondria. The protons build up dramatically within the compartment, finally reaching an enormous number. The energy released from the electrons during the electron transport system pumps the protons.

After large numbers of protons have gathered within the compartments of mitochondria and chloroplasts, they suddenly reverse their directions and escape back across the membranes and out of the compartments. The escaping protons release their energy in this motion. This energy is used by enzymes to unite ADP with phosphate ions to form ATP. The energy is trapped in the high-energy bond of ATP by this process, and the ATP molecules are made available to perform cell work. The movement of protons is chemiosmosis because it is a movement of chemicals (in this case, protons) across a semipermeable membrane. Because chemiosmosis occurs in mitochondria and chloroplasts, these organelles play an essential role in the cell’s energy metabolism. Photosynthesis explains how energy is trapped in the chloroplasts in plants, while Cellular Respiration explains how energy is released in the mitochondria of plant and animal cells.

March 20, 2017